© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message dot1xApmHeldAction reAuthenticating: failed sending terminate
cause, intf <Interface Number>
Explanation Failed sending terminate cause reauthentication failure.
Recommended Action The system is terminate to send.
Severity Level 6
Error Message dot1xApmHeldAction: could not set state to unauthorized, intf
<Interface Number>
Explanation Could not set state to unauthorized in the APM state held.
Recommended Action The authorized state is failed.
Severity Level 6
Error Message dot1xApmForceAuthAction: could not set state to authorized, intf
<Interface Number>
Explanation Could not set state to authorized in the APM state forece
authorized.
Recommended Action The state is unauthorized by the interface number.
Severity Level 6
Error Message dot1xApmForceUnauthAction: could not set state to
unauthorized, intf <Interface Number>
Explanation Could not set state to unauthorized in the APM state force
unauthorized.
Recommended Action The state is unauthorized by the interface number
Severity Level 6
Error Message dot1xApmForceUnauthAction: failed sending terminate cause,
intf <Interface Number>
Explanation Failed sending terminate cause administrator reset.
Recommended Action The state is unauthorized by the interface number.
Severity Level 6
Error Message dot1xBamResponseAction: failed getting auth method, intf
<Interface Number>
Explanation If we couldn't get an auth method, log an error and fail the
authentication.
Recommended Action The interface number is need to be authorized.
To Next Page
Loading...
