Fujitsu PRIMERGY BX900 - Page 58

© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message dot1xRadiusAccountingStop: error calling
radiusAccountingStop, ifIndex=<Interface Index>
Explanation Send accounting stop request failed.
Recommended Action The dot1x & Radius is not syschonous
Severity Level 6
Error Message dot1xApmMachine: could not set state to unauthorized, intf
<Interface Number>
Explanation If port is not operable, set it to unauthorized.
Recommended Action The port is not operable.
Severity Level 6
Error Message dot1xApmDisconnectedAction: failed sending terminate cause,
intf <Interface Number>
Explanation Failed sending terminate cause when the APM state
disconnected.
Recommended Action The system is disconnected by the Radius server.
Severity Level 6
Error Message dot1xApmDisconnectedAction: could not set state to
unauthorized, intf <Interface Number>
Explanation Could not set state to unauthorized in the APM state
disconnected.
Recommended Action The system is disconnected by the Radius server.
Severity Level 6
Error Message dot1xApmForceAuthAction: could not set state to unauthorized,
intf <Interface Number>
Explanation Could not set state to unauthorized in the APM state
authenticated.
Recommended Action The system is disconnected by the Radius server.
Severity Level 6
Error Message dot1xApmHeldAction suppRestarting: failed sending terminate
cause, intf <Interface Number>
Explanation Failed sending terminate cause supplicant restart.
Recommended Action The system is terminate to send.