© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message RADIUS: Could not allocate a request buffer
Explanation Could not allocate a request buffer when process radius request
Information.
Recommended Action The Radius module is not available and check again.
Severity Level 6
Error Message RADIUS: Registrar ID <Registrar ID> greater then last
component ID
Explanation The registrar ID greater then last component ID when process
radius response registration.
Recommended Action The Radius module is abnormal.
Severity Level 6
Error Message radiusResponseDeregister registrar_ID <Component Id> greater
than L7_LAST_COMPONENT_ID
Explanation The deregistrar ID greater than the last component ID.
Recommended Action The Radius module is abnormal.
Severity Level 6
Error Message radiusResponseDeregister registrar_ID <Component Id> not
registered
Explanation The deregistrar ID was not registered.
Recommended Action The Radius module need to be checked the set configuration
Severity Level 6
Error Message RADIUS: could not get buffer
Explanation Could not get attribute-value pair buffer.
Recommended Action The Radius module is abnormal.
Severity Level 6
Error Message RADIUS: Could not allocate requestInfo
Explanation Could not allocate request Information when authenticate a user
with a RADIUS server.
Recommended Action The Radius module is abnormal.
Severity Level 6
Error Message RADIUS: Could not allocate accounting requestInfo
Explanation Could not allocate accounting request Information when start the
accounting for the session.
Recommended Action The Radius module is abnormal.
To Next Page
Loading...
