© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message RADIUS: Failed to initialize the dictionary
Explanation Failed to initialize the dictionary when radius client shutdown.
Recommended Action The Radius module is failed to int.
Severity Level 6
Error Message RADIUS: could not save config file <Radius Config File Name>
Explanation Failed to saves the RADIUS client configuration.
Recommended Action The radius config file is corrupt instead of the factory default.
Severity Level 6
Error Message RADIUS: Msg Queue is full! Event: <Event ID>
Explanation Add a command to the RADIUS client message queue is full.
Recommended Action The Radius module is abnormal.
Severity Level 6
Error Message RADIUS: Invalid event received
Explanation Save an invalid event to a shared memory
Recommended Action The Radius module is abnormal.
Severity Level 6
Error Message RADIUS: Unknown message event <Message Event>
Explanation Dispatch an unknown event to a handling function.
Recommended Action The Radius module is abnormal.
Severity Level 6
Error Message RADIUS: Request not found for the response
Explanation Request not found for the response when process a RADIUS
packet received from a server.
Recommended Action To check between the system and Radius Server, it will be
available or not.
Severity Level 6
Error Message RADIUS: radiusDictionaryInit() could not allocate memory
Explanation Could not allocate radius dictionary memory.
Recommended Action The Radius module is failed to int.
To Next Page
Loading...
