Fujitsu PRIMERGY BX900 - Page 66

© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message RADIUS: Invalid packet length - <Packet Length>
Explanation An invalid packet length from RADIUS response.
Recommended Action To check between the system and Radius Server, it will be
available or not.
Severity Level 6
Error Message RADIUS: Server address doesn't match configured server
Explanation The RADIUS server address doesn't match configured server.
Recommended Action Check the IP address is wrong or not.
Severity Level 6
Error Message RADIUS: Invalid code - <Header Code>
Explanation An Invalid code in RADIUS header contents.
Recommended Action To check between the system and Radius Server, it will be
available or not.
Severity Level 6
Error Message RADIUS: Invalid data length - <Header Message Length>
Explanation Invalid data length in RADIUS header contents.
Recommended Action To check between the system and Radius Server, it will be
available or not.
Severity Level 6
Error Message RADIUS: Failed to send all of the request
Explanation Failed to send a packet to the RADIUS server and increments
counters.
Recommended Action To check between the system and Radius Server, it will be
available or not.
Severity Level 6
Error Message RADIUS: Failed to send the request
Explanation Failed to send the Packet to the RADIUS server.
Recommended Action To check between the system and Radius Server, it will be
available or not.
Severity Level 6
Error Message UserMgr: Unable to create msg queue
Explanation Unable to create message queue when Initialize the userMgr for
Phase 1.
Recommended Action The Radius module is failed to int.