Fujitsu PRIMERGY TX1320 M5 User Manual

6.4.3 Replacing a hot-plug PSU 122
6.4.4 Replacing the power distribution board 124
7 Hard disk drive (HDD) / solid state drive (SSD)
133
7.1 Safety notes 133
7.2 Basic information 134
7.3 Handling HDDs or SSDs without installation frame 135
7.3.1 2.5-inch HDD/SSD and 2.5-inch installation frame 135
7.4 3.5-inch HDD configurations 137
7.4.1 Configuration with up to two 3.5-inch HDDs 137
7.4.2 Installing 3.5-inch non hot-plug HDDs 137
7.4.3 Removing 3.5-inch non hot-plug HDDs 143
7.4.4 Replacing a 3.5-inch non hot-plug HDD 148
7.5 2.5-inch HDD/SSD configurations 150
7.5.1 Configuration with up to four HDD/SSD modules 150
7.5.2 Configuration with up to eight HDD/SSD modules 150
7.5.3 Configuration with up to four PCIe SSD modules 151
7.5.4 Installing 2.5-inch HDD/SSD modules 152
7.5.5 Removing 2.5-inch HDD/SSD modules 154
7.5.6 Replacing a 2.5-inch HDD/SSD module 157
7.5.7 Replacing a 2.5-inch backplane 159
7.5.8 Upgrading configuration from up to four to up to eight 2.5-inch
HDDs/SSDs 166
7.5.9 Upgrading to 4x PCIe 2.5-inch SSD configuration 168
8 Fans 171
8.1 Safety notes 171
8.2 Basic information 171
8.3 Replacing the HDD fan (3.5-inch HDD variant) 173
8.4 Replacing the HDD fan (2.5-inch HDD variant) 176
Content
TX1320 M5 Upgrade and Maintenance Manual

Fujitsu PRIMERGY TX1320 M5 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX1320 M5
Category	Server
Language	English