4.8 Reassembling
4.8.1 Safety notes
CAUTION
▶
Before attaching the covers, make sure no unnecessary parts or
tools are left inside the server.
▶
The top cover must be replaced as soon as possible for purposes
of cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
▶
For more information, see "Important information" on page 29
.
4.8.2 Installing the server cover
Figure 10: Closing the server cover
▶
Fit the server cover on the chassis (1).
▶
Slide the server cover towards the rear until the locking lever grips (2).
▶
Fold down the locking lever (3).
Basic hardware procedures
54 Upgrade and Maintenance Manual TX1320 M5
To Next Page
Loading...
