Concluding steps
▶
"Installing the new system board" on page 343
.
▶
"Installing the expansion card" on page 197.
▶
"Installing the 2.5-inch HDD cage" on page 62 or "Installing 3.5-inch non hot-
plug HDDs" on page 137.
▶
Install the HDD fan modules, see "Installing the HDD fan module (2.5-inch
HDD variant)" on page 68 or "Installing the HDD fan module (3.5-inch HDD
variant)" on page 65.
▶
"Reassembling" on page 54.
▶
"Connecting the power cord" on page 57.
▶
"Switching on the server" on page 60.
▶
"Resuming BitLocker functionality" on page 91.
6.4 Redundant power supply
6.4.1 Installing a hot-plug PSU
Customer Replaceable
Unit (CRU)
Hardware: 5 minutes
Tools: tool-less
Preliminary steps
No steps needed.
Power supply unit (PSU)
116 Upgrade and Maintenance Manual TX1320 M5
To Next Page
Loading...
