Fujitsu PRIMERGY TX1320 M5 User Manual

▶
"Reassembling" on page 54.
▶
"Connecting the power cord" on page
57.
▶
"Switching on the server" on page 60.
7.5.8 Upgrading configuration from up to four to up to
eight 2.5-inch HDDs/SSDs
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
CAUTION
All data on all HDDs/SSDs in the array will be lost when deleting the
RAID array!
▶
Be sure to back up your data before deleting a RAID array.
▶
For more information, see the "ServerView Suite RAID
Management" user guide.
After installing or removing an additional backplane, never forget to
change the system information using the Chassis ID Prom Tool.
Preliminary steps
The HDD backplane is mounted on the HDD cage. It is not necessary to
remove the HDD cage before installing or removing the HDD backplane.
▶
"Shutting down the server" on page 45
.
▶
"Disconnecting the power cord" on page 46.
▶
"Getting access to the component" on page 48.
▶
Remove the HDD fan modules, see "Removing the HDD fan module (2.5-
inch HDD variant)" on page 67.
Hard disk drive (HDD) / solid state drive (SSD)
166 Upgrade and Maintenance Manual TX1320 M5

Fujitsu PRIMERGY TX1320 M5 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX1320 M5
Category	Server
Language	English