Fujitsu PRIMERGY TX1320 M5 User Manual

Replacing the iRMC microSD card
▶
Remove the defective iRMC microSD card, see "Removing the iRMC
microSD card" on page 315.
CAUTION
(not valid for Europe, Middle East, India and Africa)
The iRMC microSD card contains customer information.
▶
After removing the iRMC microSD card, hand the card over to
the customer.
▶
If the customer requests disposal of the defective microSD card,
proceed as follows: Using a pair of side-cutting pliers, cut the
microSD card in half.
▶
Install the new iRMC microSD card, see "Installing the iRMC microSD card"
on page 313.
Concluding steps
▶
"Reassembling" on page
54.
▶
"Connecting the power cord" on page
57.
▶
"Switching on the server" on page 60.
17.6 M.2 SSD
17.6.1 Slots and bolts for M.2 SSDs
The system board offers two M.2 slots (Key M) with support for 80 mm and
110 mm long M.2 SSDs.
System board and components
TX1320 M5 Upgrade and Maintenance Manual 317

Fujitsu PRIMERGY TX1320 M5 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX1320 M5
Category	Server
Language	English