Fujitsu PRIMERGY TX1320 M5

iRMC-related status signals
ID indicator Global error
indicator
Description
flashing blue off A remote connection has been
established. Local VGA output has been
disabled during the remote session.
flashing blue flashing orange An emergency flash of the iRMC firmware
is in progress.
For more information about the iRMC flash procedure, see "Basic
software procedures" in the "FUJITSU Server PRIMERGY TX1320 M5
Upgrade and Maintenance Manual".
18.2.3.3
LAN indicators
Figure 245: LAN indicators
1 LAN link/transfer indicator 2 LAN speed indicator
Appendix A
TX1320 M5 Upgrade and Maintenance Manual 369