4.7 Getting access to the component
4.7.1 Safety notes
CAUTION
▶
Only for non-hot plug components:
●
Before removing or attaching covers, turn off the server
, all
peripheral devices, and any other connected devices.
●
Because there is a risk of electric shock or damage, please
disconnect all power cords from the outlet.
▶
The top cover must be replaced as soon as possible for purposes
of cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
▶
For more information, see "Important information" on page 29
.
▶
Only valid for the floorstand model: Do not lift the server by the
front cover in order not to damage the locking clips.
Basic hardware procedures
48 Upgrade and Maintenance Manual TX1320 M5
To Next Page
Loading...
