4.9 Connecting the power cord
4.9.1 Connecting the power cord (standard PSU, with
cable tie)
CAUTION
The server automatically adjusts to a mains voltage in the range from
100 V - 240 V
.
▶
You may only operate the server if its rated voltage range
corresponds to the local mains voltage.
▶
Connect the power cord to the PSU.
▶
Connect the mains connector to a grounded mains outlet in the in-house
power supply network.
You can secure the power cord using a cable tie to ensure that the
insulated connector cannot be disconnected from the server
accidentally
. The cable tie is included in the accessories pack that is
delivered together with the server
.
Basic hardware procedures
TX1320 M5 Upgrade and Maintenance Manual 57
To Next Page
Loading...
