Fujitsu PRIMERGY TX1320 M5 User Manual

Figure 14: Securing power cord
▶
Thread the cable tie through the eye (1).
▶
Pull the cable tie tight to secure the power cable (2).
The insulated connector cannot now be disconnected from the server
accidentally
.
Y
ou can loosen the cable tie by opening the small locking lever (2).
It will take about 60 seconds until the server can be powered on.
4.9.2 Connecting the power cord (hot-plug PSU)
CAUTION
The server automatically adjusts to a mains voltage in the range from
100 V - 240 V
.
▶
You may only operate the server if its rated voltage range
corresponds to the local mains voltage.
Basic hardware procedures
58 Upgrade and Maintenance Manual TX1320 M5

Fujitsu PRIMERGY TX1320 M5 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX1320 M5
Category	Server
Language	English