Fujitsu PRIMERGY TX1320 M5

Concluding steps
▶
"Reassembling" on page 54
.
▶
"Connecting the power cord" on page 57.
▶
"Switching on the server" on page 60.
16.5 Replacing the dust covers
Upgrade and Repair Unit
(URU)
Hardware: 15 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Shutting down the server" on page 45
.
▶
"Disconnecting the power cord" on page 46.
▶
"Getting access to the component" on page 48.
Removing the dust covers
▶
Remove the dust covers, see "Removing the dust covers" on page 293.
Installing the dust covers
▶
Install the dust covers, see "Installing the dust covers" on page 288.
Concluding steps
▶
"Reassembling" on page 54.
▶
"Connecting the power cord" on page 57.
▶
"Switching on the server" on page 60.
Dust cover
TX1320 M5 Upgrade and Maintenance Manual 297