10 Main memory
10.1 Safety notes
CAUTION
â–¶
Before removing several memory modules, make sure that all
memory modules can be reinstalled into their original slots.
Otherwise, data may be lost.
â–¶
Do not install unsupported third party memory modules. For more
information on supported memory modules, see "Basic
information" on page 19
. Doing so may cause electric shock, a fire,
or failures.
â–¶
Memory modules remain hot after shutdown. Wait for components
to cool down before installing or removing memory modules to
prevent burns.
â–¶
Do not install and remove memory modules repeatedly. Doing so
may cause failures.
â–¶
If the memory module has not been correctly installed, it may cause
a fire. Install the memory module with attention.
Pressing out the securing clips on the memory module connector
will eject the installed memory module. To prevent damage and
injuries eject memory modules carefully without applying excessive
force.
â–¶
For more information, see "Important information" on page 29.
TX1320 M5 Upgrade and Maintenance Manual 221
To Next Page
Loading...
Need help?
General