Fujitsu PRIMERGY TX1320 M5 User Manual

CAUTION
▶
Dispose of used battery properly. Keep away from children.
▶
Do not throw flash backup units into the trash can. Batteries must
be disposed of in accordance with local regulations concerning
special waste.
Preliminary steps
▶
"Locating the defective server" on page 43.
▶
"Shutting down the server" on page
45.
▶
"Disconnecting the power cord" on page 46.
▶
"Getting access to the component" on page 48.
▶
"Disconnecting the front USB connector" on page 277.
Removing the defective FBU
▶
Disconnect the FBU, see "Disconnecting the FBU" on page 216.
▶
Remove the FBU from the FBU tray, see "Removing the FBU tray" on
page 210.
Installing the new FBU
▶
Install the FBU into the FBU tray, see "Installing the FBU tray" on page 219.
▶
Connect the FBU, see "Connecting the FBU" on page 214.
Concluding steps
▶
"Connecting the front USB connector" on page 276.
▶
"Reassembling" on page 54.
▶
"Connecting the power cord" on page 57.
▶
"Switching on the server" on page 60.
▶
"Updating expansion card firmware" on page 79.
Expansion cards and backup units
220 Upgrade and Maintenance Manual TX1320 M5

Fujitsu PRIMERGY TX1320 M5 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX1320 M5
Category	Server
Language	English