Installing the performance heat sink
Figure 148: Installing the performance heat sink
▶
Carefully place the heat sink on the four threaded holes as shown.
CAUTION
▶
Ensure that the screws on the heat sink are properly seated on the
threaded holes.
▶
Ensure that the heat sink cooling fins match the direction of the
airflow!
▶
Fasten the four captive screws on the heat sink in a crossover pattern
(screw torque: 0.6 Nm, not applicable for Japan) (1-4).
▶
Connect the CPU fan cable to the connector "FAN CPU" on the system
board, see Figure 147
.
Concluding steps
▶
"Reassembling" on page 54.
▶
"Connecting the power cord" on page 57.
Processor (CPU)
242 Upgrade and Maintenance Manual TX1320 M5
To Next Page
Loading...
