▶
"Suspending BitLocker functionality" on page 71
.
▶
"Shutting down the server" on page 45.
▶
"Disconnecting the power cord" on page 46.
▶
"Getting access to the component" on page 48.
Removing the TPM
▶
Remove the system board, see "Removing the defective system board" on
page 340.
▶
Lay the system board on a soft, antistatic surface with its component side
facing down.
Figure 205: Removing the TPM screw
System board and components
TX1320 M5 Upgrade and Maintenance Manual 309
To Next Page
Loading...
