4.8 Reassembling 54
4.8.1 Safety notes 54
4.8.2 Installing the server cover 54
4.8.3 Installing the HDD bay cover 55
4.8.4 Installing the accessible drive bay cover 55
4.9 Connecting the power cord 57
4.9.1 Connecting the power cord (standard PSU, with cable tie) 57
4.9.2 Connecting the power cord (hot-plug PSU) 58
4.10 Switching on the server 60
4.11 Handling the 2.5-inch HDD cage 60
4.11.1 Removing the 2.5-inch HDD cage 60
4.11.2 Installing the 2.5-inch HDD cage 62
4.12 Handling the HDD fan modules 64
4.12.1 Removing the HDD fan module (3.5-inch HDD variant) 64
4.12.2 Installing the HDD fan module (3.5-inch HDD variant) 65
4.12.3 Removing the HDD fan module (2.5-inch HDD variant) 67
4.12.4 Installing the HDD fan module (2.5-inch HDD variant) 68
5 Basic software procedures 71
5.1 Validation 71
5.2 Starting the maintenance task 71
5.2.1 Suspending BitLocker functionality 71
5.2.2 Disabling the boot watchdog 72
5.2.3 Removing backup and optical disk media 74
5.2.4 Verifying and configuring the backup software solution 74
5.2.5 Switching on the ID indicator 74
5.3 Completing the maintenance task 75
5.3.1 Updating or recovering the BIOS and iRMC S6 75
5.3.2 Verifying system information backup or restore 78
5.3.3 Updating expansion card firmware 79
5.3.4 Reconfiguring the backup software solution 80
5.3.5 Resetting the boot retry counter 81
Content
TX1320 M5 Upgrade and Maintenance Manual
To Next Page
Loading...
Need help?
General