9 Power cable Backplane 2: X17 X3
For the cable plan, see "Appendix B" on page 519.
3.5-inch HDD/SSD configurations
Figure 165: Connecting cables to expander board (example 12x 3.5-inch HDDs/SSDs)
▶
Connect the cables to the SAS expander board:
Cable Connector on
backplane/
controller
Connector on
SAS expander
board
1 SAS cable Backplane 1: X9 X10
2 SAS cable Backplane 2: X9 X11
3 SAS cable Backplane 3: X9 X12
4 SAS cable SAS controller:
MLC1
X1
5 SAS cable SAS controller:
MLC2
X2
Hard disk drive (HDD) / solid state disk (SSD)
270 Upgrade and Maintenance Manual TX1330 M4
To Next Page
Loading...
