▶
Select the Advanced menu.
▶
Select the T
rusted Computing submenu.
▶
Set the
TPM Support and TPM State settings to Disabled.
▶
Save your changes and exit the BIOS.
For information on how to access the BIOS and modify settings, see the
corresponding BIOS Setup Utility reference manual.
Removing the TPM
▶
Remove the system board, see "Removing the defective system board" on
page 452.
▶
Lay the system board on a soft, antistatic surface with its component side
facing down.
Figure 279: Removing the TPM screw
System board and components
TX1330 M4 Upgrade and Maintenance Manual 423
To Next Page
Loading...
