▶
Remove the following components from the system board as shown in the
related sections:
▶
Heat sinks: "Removing the heat sink" on page 343.
Leave the CPU on the defective board for now.
▶
Memory modules: "Removing memory modules" on page
336
.
Ensure to take note of the memory modules’ mounting positions for
reassembly.
▶
Expansion cards:
If applicable, disconnect the riser card, see "Installing an expansion card"
on page 299
.
Ensure to take note of the controllers’ mounting positions and
cable connections for reassembly.
▶
iRMC microSD card:
"Removing the iRMC microSD card" on page 429.
▶
If applicable, M.2 SSD, see "Removing the M.2 SSD" on page
437.
▶
If applicable, Dual microSD 64 GB Enterprise, see "Removing the Dual
microSD 64GB Enterprise" on page 444.
Removing the defective system board
▶
Disconnect all cables from the system board.
System board and components
452 Upgrade and Maintenance Manual TX1330 M4
To Next Page
Loading...
