GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3 LOGIQ™ 9 PROPRIETARY MANUAL
Chapter 8 Replacement Procedures 8-41
8-7-4 MOD Drive Removal Procedure (cont’d)
5.) Remove the two screws in the front of the MOD drive as shown in Figure 8-42 on page 8-41 .
6.) Slide the MOD out the front of the BEP as shown in Figure 8-42 on page 8-41 .
7.) Remove the four screws, two on each side, to remove the top cover and side rails from the MOD
case.
Figure 8-42 MOD Removal
Figure 8-43 MOD with Case Cover Off
To Next Page
Loading...
Need help?
General
