• Added “Enable Auto E-mail Notification” option in Web GUI→PBX→Internal Options→General. [PBX
Settings/General]
• Added options “ICE Support” and “STUN Server” in Web GUI→PBX→Internal Options→RTP Settings.
[PBX Settings/RTP Settings]
• Added payload type setting for VP8 in Web GUI→PBX→Internal Options→Payload. [PBX
Settings/Payload]
• Added options “External Host” and “Use IP address in SDP” in Web GUI→PBX→SIP Settings→NAT. [SIP
Settings/NAT]
• Improved CDR. [CDR Improvement]
• Added Network Status page under Web GUI→Maintenance→Troubleshooting→Network Status [Network
Status]
Firmware Version 1.0.9.26
• Added Announcements Center. [ANNOUNCEMENTS CENTER]
Firmware Version 1.0.9.25
• Added UCM Zero Config model templates for provisioning GXP2200EXT coupled with GXV3240. [Model
templates]
• Added ability to select the voicemail storage (Support Email + WAV). [Voicemail Email Settings]
Firmware Version 1.0.9.23
• Added SSH enable/disable option in LCD or WEB [SSH Access]
• Added remote peer extensions in Ring Group [Remote Extension in Ring Group]
• Added ability to prepend digits in inbound routes [Table 62: Inbound Rule Configuration Parameters]
• Added ability to search extensions on Extension page. [Search and Edit Extension]
• Added user portal for users to log in with extension number, access user information, extension configuration
and CDR.
• Added support to send Fax via Web GUI. [Fax Sending]
• Added "Enable LDAP" option to skip the extension from UCM default LDAP phonebook. [Table 34: SIP
Extension Configuration Parameters→Basic Settings]
• Added DDNS Support. [DDNS settings]
• Added support for Call Barging using feature codes. [Enable Spy]
• Added ability to search the CDR by called number. [Table 125: CDR Filter Criteria]
• Added ability to select the file types for automatic backup. [Backup/Restore]
• Added automatic backup support on SD Card or USB storage. [Backup/Restore]
• Added support to skip trunk authentication by time condition. [Table 36: SIP Extension Configuration
Parameters→Features]
• Added option to send P-Asserted-Identity header in SIP Register Trunk. [Table 54: SIP Register Trunk
Configuration Parameters]
To Next Page
Loading...
Need help?
General
