Grandstream Networks UCM6104

P a g e | 393
UCM6100 Series User Manual
Version 1.0.18.13
1. Go to Web GUI→Maintenance→Change Information page.
2. Enter the old password first.
3. Enter the new password and re-type the new password to confirm. The new password has to be at least 4
characters. The maximum length of the password is 30 characters.
4. Configure the Email Address that is used when login credential is lost.
5. Click on "Save" and the user will be automatically logged out.
6. Once the web page comes back to the login page again, enter the username "admin" and the new password
to login.
Figure 281 : Change Password
Enter Old Password
Enter the Old Password for UCM6100
Enter New Password
Enter the New Password for UCM6100
Retype New Password
Retype the New Password for UCM6100
Change binding Email
UCM6100 allows user to configure binding email in case login password is lost. UCM6100 login credential will
be sent to the designated email address. The feature can be found under Web GUI→System Settings→User
Management→Change Binding Email.