Security Settings
The UCM6100 provides users firewall security configurations to prevent certain malicious attack to the UCM6100
system. Users could configure to allow, restrict or reject specific traffic through the device for security and
bandwidth purpose. The UCM6100 also provides Fail2ban feature for authentication errors in SIP REGISTER,
INVITE and SUBSCRIBE. To configure firewall settings in the UCM6100, go to Web GUI→System
Settings→Security Settings page.
Static Defense
Under Web GUI→System Settings→Security Settings→Static Defense page, users will see the following
information:
• Current service information with port, process and type.
• Typical firewall settings.
• Custom firewall settings.
The following table shows a sample current service status running on the UCM6100.
Table 14: UCM6100 Firewall→Static Defense→Current Service
To Next Page
Loading...
Need help?
General
