Grandstream Networks UCM6104 User Manual

P a g e | 212
UCM6100 Series User Manual
Version 1.0.18.13
Inbound Route: Inbound Mode BLF Monitoring
Users can assign MPKs and VPKs to monitor and toggle the current global inbound mode of the UCM.
To do this, please refer to the following steps:
1. Access the UCM web GUI and navigate to Extension/Trunk->Inbound Routes.
2. Click on the button and enable Inbound Multiple Mode.
3. Edit the subscribe number field to the desired BLF value.
Figure 120: Global Inbound Mode
4. Configure the BLF value on a phone’s MPK/VPK. As an example, a GXP2140 with the BLF configured will
show the Inbound Mode status on its screen once configured. The 777 BLF is lit green, indicating that the
current inbound mode is “Default Mode”.
Figure 121 : Inbound Mode - Default Mode
5. Pressing the key will toggle the inbound mode to “Mode 1”, and the button’s color will change to red.
Figure 122 : Inbound Mode - Mode 1

Grandstream Networks UCM6104 Specifications

General

Brand	Grandstream Networks
Model	UCM6104
Category	PBX
Language	English