Web GUI Configurations
There are eight main sections in the Web GUI for users to view the PBX status, configure and manage the PBX.
• System Status: Displays PBX status, System Status, Active calls and network status.
• Extension/Trunk: To configure extensions, trunks and manage inbound/outbound call routes.
• Call Features: To Configure call features such as ring groups, call queues, IVR ...Etc
• PBX Settings: Extension ranges, SIP Settings, interfaces settings and MOH.
• System Settings: To configure user management, network settings, firewall settings, change password,
LDAP Server, HTTP Server, Email Settings, Time Settings, NTP server and login timeout.
• Maintenance: To perform firmware upgrade, backup configurations, cleaner setup, reset/reboot, syslog
setup and troubleshooting.
• CDR: View call statistics and download CDR and call recordings.
• Value-added Features: Zero Config, enable CTI server, CRM, PMS WebRTC.
Web GUI Languages
Currently the UCM6100 series Web GUI supports English, Simplified Chinese, Traditional Chinese,
Spanish, French, Portuguese, Russian, Italian, Polish, German etc.
Users can select the displayed language in Web GUI login page, or at the upper right of the Web GUI after
logging in.
Figure 11: UCM6100 Web GUI Language
To Next Page
Loading...
Need help?
General
