Grandstream Networks UCM6104

P a g e | 131
UCM6100 Series User Manual
Version 1.0.18.13
Figure 73: Modify Selected Devices - Different Models
----------------------------------------------------------------------------------------------------------------------------- ----------------------
Note:
Performing batch operation will override all the existing device configuration on the page.
----------------------------------------------------------------------------------------------------------------------------- ----------------------
After the above configurations, save the changes and go back to Web GUI→Value-added Features→Zero
Config→Zero Config page. Users could then click on to send NOTIFY to the SIP end point device and
trigger the provisioning process. The device will start downloading the generated configuration file from the URL
contained in the NOTIFY message.