Grandstream Networks UCM6104 User Manual

P a g e | 106
UCM6100 Series User Manual
Version 1.0.18.13
Figure 57: Auto Provision Settings
Table 24: Auto Provision Settings
Enable Zero Config
Enable or disable the zero-config feature on the PBX. The default setting
is enabled.
Enable Automatic
Configuration Assignment
By default, this is disabled. If disabled, when SIP device boots up, the
UCM6100 will not send the SIP device the URL to download the config file
and therefore the SIP device will not be automatically provisioned by the
UCM6100.
Note:
When disabled, SIP devices can still be provisioned by manually sending
NOTIFY from the UCM6100 which will include the XML config file URL for
the SIP device to download.
Automatically Assign
Extension
If enabled, when the device is discovered, the PBX will automatically
assign an extension within the range defined in "Zero Config Extension
Segment" to the device. The default setting is disabled.

Grandstream Networks UCM6104 Specifications

General

Brand	Grandstream Networks
Model	UCM6104
Category	PBX
Language	English