----------------------------------------------------------------------------------------------------------------------------- ----------------------
Note:
By default, the UCM6100 has "Redirect From Port 80" enabled. Therefore, if users type in the UCM6100 IP
address in the web browser, the web page will be automatically redirected to the page using HTTPS and port
8089. For example, if the LCD shows 192.168.40.167, please enter 192.168.40.167 in your web browser and
the web page will be redirected to: https://192.168.40.167:8089
The option "Redirect From Port 80" can be set under the UCM6100 Web GUI→System Settings→HTTP Server.
----------------------------------------------------------------------------------------------------------------------------- ----------------------
Setup Wizard
When the user logs in the UCM6100 Web GUI for the first time, a setup wizard will guide the user to set up basic
configuration. Configurations in setup wizard includes: Time zone, Change password, Network settings,
Extensions, Trunk and routes.
Figure 10: UCM6100 Setup Wizard
Users can disable the Extension Range during configuration on the Extensions.
During the wizard, the user can quit the setup wizard at any time to start over with manual configuration. At the
last step of the wizard, the user will be provided with summary for review, before the configuration is loaded.
Once the setup is completed, the system is ready to go.
To Next Page
Loading...
Need help?
General
