Grandstream Networks UCM6104

P a g e | 351
UCM6100 Series User Manual
Version 1.0.18.13
Connecting to PMS
On the UCM WebGUI→Value-added Features→PMS→Basic Settings” set the connection information for the
PMS platform.
Table 112: PMS Basic Settings
Field
Description
PMS Module
Users can select the desired PMS module from the drop-down list.
Hmobile.
Mitel.
HSC.
Wake Up Prompt
Prompt used when answering the wakeup calls it can be customized
from “PBX Settings→Voice Prompt→Custom Prompt.
PMS URL
Enter the PMS system URL
UCM Port
Enter the Port used by the PMS system
Username
Enter the Username to connect to the PMS system
Password
Enter the password to connect to the PMS system
In order to use some PMS features please activate the feature code associated under “Call Features→Feature
Codes”
• Update PMS Room Status
• PMS Wake Up Service
PMS Features
Room Status
User can create Rooms by clicking on , the following Figure will be displayed then.