UCM6100 Series User Manual
Version 1.0.18.13
Skip Authentication
When Inviting User
via Trunk from Web
GUI
If enabled, the invitation from Web GUI for a conference room with password will
skip the authentication for the invited users. The default setting is "No".
Conference Settings contains the following options:
Table 64: Conference Settings
If enabled, the AMI will send the corresponding event when a user
starts or ends talking.
The time in milliseconds of sound above what the dsp has
established as base line silence for a user before a user is
considered to be talking. This value affects several operations and
should not be changed unless the impact on call quality is fully
understood, the default value is 128.
The time in milliseconds of sound falling within the what the dsp
has established as base line silence before a user is considered
to be silent. This value affects several operations and should not
be changed unless the impact on call quality is fully understood,
the default value is 2500.
Users can check the talking Caller IDs in conference control page (UCM WebUI→Call Features→Conference).
The image will move up and down when the user is talking.
Figure 126: Conference
Join a Conference Call
To Next Page
Loading...
Need help?
General
