Uploading Devices List
Besides the built-in discovery method on the UCM, users could prepare a list of devices on .CSV file and upload
it by clicking on the button , after which a success message prompt should be displayed.
Users need to make sure that the CSV file respects the format as shown on the following figure and that the
entered information is correct (valid IP address, valid MAC address, device model ..etc), otherwise the UCM will
reject the file and the operation will fail:
Figure 60: Device list - CSV file sample
Managing discovered devices:
• Sorting: Press or to sort per MAC Address, IP Address, Version, Vendor, Model or Create
Config columns from lower to higher or higher to lower respectively.
• Filter: Select a filter to display corresponding results.
▪ All: Display all discovered devices.
▪ Scan Results: Display only manually discovered devices. [Discovery]
▪ IP Address: Enter device IP and press Search button.
▪ MAC Address: Enter device MAC and press Search button.
▪ Model: Enter a model name and press Search button. Example: GXP2130.
Figure 61: Managing Discovered Devices
To Next Page
Loading...
Need help?
General
