• Added option "Skip voicemail password verification" on extension edit page. [Table 34: SIP Extension
Configuration Parameters]
• Added Hot-Desking Support. [Table 34: SIP Extension Configuration Parameters]
• Added one-button on-demand call recording for GXP
• Add new option to enable or disable "FXS TISS Override" on Hardware Config page. [PBX Interface
Settings]
• Added more modes for FXS Two-Wire Impedance Synthesis
• Added LDAP Sync manual trigger function and synced date displaying. [VOIP TRUNKS]
• Improved LDAP Sync function, added retrying, file verifying and progress displaying function
• Added option "Pick Extension Period" on auto-provision settings page of Zero Config
• Added multiple extension assignment support on device edit page of Zero Config
• Added "Reset All Extensions" button at the Zero Config page to recycle all assigned extensions. [Auto
Provisioning]
• Added system crash alarm, core dump detection and allow users to download core dump file. [Figure 256:
System Events→Alert Events Lists: System Crash]
• Add "Keep Trunk CID" option for VoIP trunks, and keep the priorities: DOD→Extension CallerID→Trunk
CallerID→Global CallerID. [Table 53: Create New SIP Trunk]
Firmware Version 1.0.3.13
• Added Fail2Ban support for SIP authentication. [Fail2ban]
• Added "Auto Record" option for trunk.
• Added "Digit Timeout" option and voice prompt "Language" selection for IVR. [IVR Configuration Parameters]
• Added "Direct Dial Voicemail Prefix" feature code to directly dial or transfer to extension's voicemail. [Table
87: UCM6100 Feature Codes]
• Added "Enforce Strong Passwords" option. [Table 91: Internal Options/General]
• Added FXS MWI Mode. [PBX Interface Settings]
• Added system events with alert and Email notification support. [System Events]
• Added new web page for recording files. [Recording Files]
Firmware Version 1.0.2.21
• Added weight information. [Table 1: Technical Specifications]
• Added NTP server support. [NTP Server]
• Added Czech language for web GUI display. [Web GUI Languages]
• Added VLAN support. "Layer 2 QoS 802.1Q/VLAN tag" and "Layer 2 QoS 802.1p priority value" options for
network port settings are added. [Network Settings ]
• Updated LDAP client configurations information.
• Added sample Email settings. [Email]
• Added "Enable Pick Extension" and "Extension Segment" options for auto provisioning settings.
• Changed one of the discovery methods from "SIP MESSAGE (OPTIONS)" to "SIP MESSAGE (NOTIFY)" in
zero-config feature.
To Next Page
Loading...
Need help?
General
