1. Generate Alert: Generated when alert events happen, for example, alert logs for disk usage exceeding the
alert threshold.
2. Restore to Normal: Generated when alert events being cleared, for example, logs for disk usage dropping
back below the alert threshold.
User could filter out alert logs of “Generate Alert” or “Restore to Normal” by specifying the type according to need.
The following figure shows an example of filtering out alert logs of type of “Restore to Normal”.
Figure 258: Filter for Alert Log
Alert Contact
Users could add administrator's Email address under Web GUI→Maintenance→System Events→Alert
Contact to send the alert notification to. Up to 10 Email addresses can be added.
CDR
CDR (Call Detail Record) is a data record generated by the PBX that contains attributes specific to a single
instance of phone call handled by the PBX. It has several data fields to provide detailed description for the call,
such as phone number of the calling party, phone number of the receiving party, start time, call duration, etc.
On the UCM6100, the CDR can be accessed under Web GUI→CDR→CDR. Users could filter the call report by
specifying the date range and criteria, depending on how the users would like to include the logs to the report.
Click on "Search" button to display the generated report.
Important Note: Starting from fw 1.0.15.16, the UCM has CDR separation and it will display only CDR for the
current month. And in order to get older data, users need to apply filter by specifying the date range.
To Next Page
Loading...
Need help?
General
