EasyManuals Logo

Grandstream Networks UCM6104 User Manual

Grandstream Networks UCM6104
418 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #262 background imageLoading...
Page #262 background image
P a g e | 261
UCM6100 Series User Manual
Version 1.0.18.13
Queue Auto fill enhancement:
In previous UCM firmware, the call queue has a serial type behavior in that the queue will make all waiting callers
wait in the queue even if there is more than one available member ready to take calls until the head caller is
connected with the member they were trying to get to.
The next waiting caller in line then becomes the head caller, and they are then connected with the next available
member and all available members and waiting callers waits while this happens.
Starting from 1.0.14.x, the waiting callers are connecting with available members in a parallel fashion until there
are no more available members or no more waiting callers.
For example, in a call queue with linear method, if there are two available agents, when two callers call in the
queue at the same time, UCM will assign the two callers to each of the two available agents at the same time,
rather than assigning the second caller to second available agent after the first agent answers the call from the
first caller.
Queue Statistics
Along with call center features, users can also gather detailed call queue statistics allowing them to make better
changes/decision to manage better the call distribution and handling based on time, agent and queue.
To access call queue statistics, go to Web GUICall FeaturesCall Queue and click on “Call Queue Statistics”,
the following page will be displayed:
Position
Announcement
Interval
Configure the period of time in (s) during which the UCM will announce the callers
position in the call queue.
CTI Chairman
Select the extension to act as chairman of the queue (monitoring).
Enable Agent Login
When enabled, statics agents can conveniently log in and out of a queue by
configuring a programmable key on their phones as a shortcut.
Notes:
This feature is currently available only for GXP21xx phones on firmware
1.0.9.18 or greater.
After enabling the feature, users need to set the option on GXP21XX phone
under AccountSIP SettingsAdvanced FeaturesSpecial Feature
to UCM Call Center”. A softkey labeled UCM-CC will appear on the
bottom of the phone’s screen.
When this option is enabled, dynamic agent login will be no longer
supported.
In case of concurrent registrations, changing agent status on one phone
(login/logout) will be reflected on all phones.
Autofill
Enable or Disable the autofill feature.

Table of Contents

Other manuals for Grandstream Networks UCM6104

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks UCM6104 and is the answer not in the manual?

Grandstream Networks UCM6104 Specifications

General IconGeneral
BrandGrandstream Networks
ModelUCM6104
CategoryPBX
LanguageEnglish

Related product manuals