Figure 69: Edit Device
A preview of the “Advanced” settings is shown in the above figure. There are five levels configurations as
described in (1) (2) (3) (4) (5) below, with priority from the lowest to the highest. The configurations in all levels
will take effect for the device. If there are same options existing in different level configurations with different
value configured, the higher level configuration will override the lower level configuration.
(1) Global Policy
This is the lowest level configuration. The global policy configured in Web GUI→Value-added
Features→Zero Config→Global Policy will be applied here. Clicking on “Modify Global Policy” to
redirect to page Value-added Features→Zero Config→Global Policy.
(2) Global Templates
Select a global template to be used for the device and click on to add. Multiple global templates
can be selected and users can arrange the priority by adjusting orders via and . All the selected
global templates will take effect. If the same option exists on multiple selected global templates, the
value in the template with higher priority will override the one in the template with lower priority. Click on
to remove the global template from the selected list.
To Next Page
Loading...
Need help?
General
