UCM6100 Series User Manual
Version 1.0.18.13
Specify the protocol user, user should use the same settings as used on the
server
Use the same setting as used on the server.
Dev TUN: Create a routed IP tunnel.
Dev TAP: Create an Ethernet tunnel.
Compress tunnel packets using the LZO algorithm on the VPN link. Don’t enable
this unless it is also enabled in the server config file.
Upload as SSL/TLS root certificate. This file will be renamed as ‘ca.crt’
automatically.
Upload a client certificate. This file will be renamed as ‘cliend.crt’ automatically.
Upload a client private key. This file will be renamed as ‘client.key’ automatically.
Figure 25: OpenVPN feature on the UCM6100