13
Remote control set description
mc-16 and mc-20 series computer systems
two remote control sets with 2,4-GHz-Graupner-HoTT technology
(Hopping Telemetry Transmission)
Technology that enthralls.
The superior functional security of Graupner
HoTT technology accomplished with bidirectional
communications between transmitter and receiv-
er with integrated telemetry, freely programmable
voice output via headset connector, and ultra-fast
response times.
Simpli ed programming using capacitive touch-
buttons on the
mc-20 HoTT and four-way push-
buttons on the mc-16 HoTT.
High-contrast eight-line graphic screen provides
a clear display of all set-up parameters. Switch-
able blue backlighting. The
mc-20 HoTT fea-
tures an independent second screen for display-
ing telemetry data. Storage of telemetry data on a
micro SD memory card.
USB connection to read and write the model’s
memories as well as for making rmware up-
dates.
• Integrated Graupner HoTT 2.4 GHz transmission
system
• The high-speed primary processor is used for data
transfer, ensuring ultra-fast response times. No
additional delays through detours via a module
processor.
• Maximum interference immunity made possible by
optimized frequency hopping through as many as
75 channels and wider channel spread
• Intelligent data transfer with correction function
• Over 200 systems can be used simultaneously
• The HoTT technique of bidirectional communication
between sender and receiver, as well as the fastest
possible transmission rate (10 ms) assures extreme-
ly short reaction times.
• Modulation can be switched by software: when
necessary, you can switch from “HoTT” to “EXT.” or
“SP.” by pressing a button.
• Case incorporates integral patch aerial
• Transmitter features integral slot for SD and SDHC
memory cards, formatted to FAT or FAT32, for
saving log fi les, model programming data and sup-
plementary functions such as transmitter fi rmware
updates.
• Transmitter features alternative method of battery
charging via the USB socket.
• 6 different languages (Dutch, English, French, Ger-
man, Italian and Spanish) available per software
update.
• Simplifi ed arrangement of operating elements, such
as joysticks, external switches, proportional controls
and trim levers as control functions
• CONVENIENCE MODE SELECTOR to simplify
changeovers between operating modes 1 … 4 (e. g.
throttle left/throttle right)
• Extremely wide receiver operating voltage range of
3.6 V to 8.4 V (functional to 2.5 V)
The illustration shows the contents of the mc-20 HoTT transmitter set.
13
Remote control set description
To Next Page
Loading...
Need help?
General
