GRAUPNER mc-16 Programming Manual

157
Program description - Non-delayed channel
Non-delayed channel
Channel-dependent delays to switching
This option is available on the mc-20
HoTT transmitter only.
Use the selection keys of the left or right
four-way button to scroll to the »Non-
delayed channel« menu option in the Multi-function
menu:
Phase settings
Phase trim
Logical switch
Timers (general)
Phase assignment
Non-delayed chan
Phase settings
Logical switch
Timers (general)
Fl. phase timers
Phase assignment
Non-delayed chan
Open this menu option with a tap on the centre SET
key of the right four-way button.
Non-delayed channels
non-delay
normal
normal
1 2 3
4
5
6
On the »Phase settings« menu, you will have set the
necessary switch times for flight phase transitions.
In this menu, which is available as standard on the
mc-20 HoTT transmitter only, you can now dis-
able the transition delay set previously, per flight phase
and for individual control channels – e. g. for the motor
channel for electric models or heading-lock systems for
helicopter gyros, etc.
Switch over to the corresponding flight phase. This is
shown at the bottom left of the display.
Use the selection keys of the left or right four-way but-
ton to move the “” onto the corresponding channel
then briefly tap the centre SET key of the right four-way
button.
The switch icon changes from “normal” to “non-delay”
and vice versa:
Non-delayed channels
non-delay
normal
normal
7 8 9
10
11
12
mc
 
16 20

GRAUPNER mc-16 Specifications

General

Brand	GRAUPNER
Model	mc-16
Category	Remote Control
Language	English