140
Program description - Switch display
Switch display
Displaying switch positions
This option is available as standard on the
mc-20 HoTT transmitter only.
Use the selection keys of the left or right
four-way button to scroll to the »Switch
display« menu option in the Multi-function menu:
Switch display
Control switch
Channel 1 curve
Phase settings
Phase assignment
Logical switch
Open this menu option with a tap on the centre SET
key of the right four-way button:
Switch
Control Switch
C1
C3 C4
51 2 3
6
7 8 9 10
12 13 14 1511
4
C2
This feature is used to check the functions and give an
overview of switches 1 … 15 and the programmable
control switches C1… C4.
If a switch is pressed, the switch number is revealed
by one of the display items changing from an OFF to
an ON symbol (or vice versa). To improve the legibility
of this screen, a closed switch field is also shown in
inverse video (i. e. on a dark background).
For control switches C1 … C4, activation of the cor-
responding transmitter control – which must have
been previously assigned on the »Control switch«
menu – will reveal the control switch number and direc-
tion.
Note:
Switch numbering 1 to 15 as shown here
corresponds to the labeling of switch plug-in
locations on the transmitter’s circuit board
and not necessarily to the numbering of the transmit-
ter’s switch board. The numbering of the switches
has no effect on the programming of the transmitter,
however.
mc
16 20
To Next Page
Loading...
Need help?
General
