32
Transmitter description - Shortcuts
Shortcuts
The following key combinations can be used to directly
call up certain menus and options:
• CLEAR
A brief simultaneous tap on the or keys of
the right four-way button will reset a changed para-
meter value in the active entry field back to its de-
fault value.
• »Servo display«
A brief simultaneous tap on the keys of the left
four-way button will change from the transmitter’s
base screen or from almost any menu position to
the »Servo display« menu, see page 274.
• »Telemetry« menu
Tap the centre ESC key of the left four-way button
for about 1 s to call up the »Telemetry« menu from
the transmitter’s base screen or return to the base
screen again, see text beginning on page 228.
• Graphic display of telemetry data
Briefly touching one of the selection keys of the left
or right four-way button will cause a jump from the
base screen directly to the transmitter’s graphic dis-
play of telemetry data or will allow paging back and
forth between individual graphic displays.
A brief tap on the centre ESC or SET key will cause
a return back to the base screen.
• »SECRET MODE«
(Language selection, Firmware update, Stick calib-
ration etc.)
Touch and hold the selection keys of the left
four-way button then momentarily touch the SET
key of the right four-way button, see text beginning
on page36.
• Entry lockout
Entry lockout is activated and deactivated from the
base screen by simultaneously touching the ESC
and SET keys for about 2 s.
• Quick-Select
From the multi-function list, a jump can be made
into a “Structure overview” by way of a brief, si-
multaneous tap on the or keys of the
right four-way button. Menus are arranged in clear
groups in this overview.
Memory
Servo setting
Transm. controls
Switches
Flight phases
Timers
Mixers
Special. funct.
Global functions
All menus
Now the desired group can be selected with the
selection keys of the left or right four-way but-
ton …
Servo setting
Transm. controls
Switches
Flight phases
All menus
Memory
… then finally tap the centre SET key of the right
four-way button briefly. As soon as the key is re-
leased, only the respective generic term for the giv-
en menu will remain listed. For example:
Copy / Erase
Suppress menus
Suppress models
Model select
Now you can select the desired menu point us-
ing the or buttons, and then call it up by
pressing the SET button of the right-hand four-way
button.
To Next Page
Loading...
Need help?
General
