GRAUPNER mc-16 Programming Manual

276
Program description - Code lock
Code lock
Locking the multifunction menu
This option is available on the mc-20
transmitter only.
Use the selection keys on the left or right
four-way button to scroll to the menu op-
tion »Code lock« menu option in the multi-function
menu:
MP3 player
Basic settings
Servo display
Servo test
Info display
Code lock
Tap briefly on the centre SET key of the right four-way
button to open this menu option:
Code lock
Desired (new)
secret number
(_ )
SET
3
21 3 4
Access to the multifunction menu can be locked
against unauthorized use by a four-digit secret code
comprised of the numbers 1 to 4. This code lock is en-
tered by way of the selection keys of the left four-way
button according to the scheme shown in the display,
for example:
Code lock
Desired (new)
secret number
(123_)
SET
3
21 3 4
As soon as another tap of a left four-way button se-
lection key occurs after the fourth number has been
entered, the message shown below will appear in the
display:
Code lock
Desired (new)
secret number
(123_)
CLR
3
21 3 4
Memorise secret
number carefully
A brief tap on the centre ESC key of the left four-way
button will conrm the entered secret code and exit
the menu.
On the contrary, a brief tap on the centre SET key
of the right four-way button will confirm the currently
active CLR field at the bottom right of the display and
thus erase the entered digits.
Make note of the secret code and keep it
safe. Otherwise, the transmitter must be
sent in to Graupner service for decoding.
The lock becomes active the next time the transmit-
ter is switched on. However, the control remains ready
for operation. However, a call-up of the multi-function
menu, and thus also a model change, can no longer
be accomplished without entering the correct number
combination:
Code lock
Desired (new)
secret number
(_ )
SET
3
21 3 4
A renewed attempt following an incorrect entry is only
possible after the lapse of a time-out:
Code lock
Desired (new)
secret number
(123_)
CLR
3
21 3 4
Input error
Time lock
Deletion of the secret code
If the secret code is to be erased later on, tap twice on
the centre SET key of the right four-way button right
after calling up this menu option.
Code lock
Desired (new)
secret number
(1234)
CLR
3
21 3 4
The first activation of the centre SET key of the right
four-way button will erase the secret code (CLR):
Code lock
Desired (new)
secret number
(_ )
SET
3
21 3 4
And the second activation will confirm the empty en-
try field (SET). The message shown will appear in the
display:
mc
 
16 20

GRAUPNER mc-16 Specifications

General

Brand	GRAUPNER
Model	mc-16
Category	Remote Control
Language	English