213
Program description - MIX-only channel
Mix-only channel
only
normal
1 2 3
4
5
6
• If your model has built-in airbrakes, however, and
you would like to perhaps test the performance of
a buttery system with and without airbrakes, sim-
ply set channel 1 to “MIX only” and program a free
mixer “C1 C1”, so as to restore your ability to
control the airbrakes via servo 1. If you also as-
sign a switch to this mixer, then you will be able to
switch this mixer on and off as you please.
To Next Page
Loading...
