GW Instek GPT-9500 Series - Page 37

OPERATION
37
READY Status
When the tester is in READY status of MANU
or AUTO test, it is ready to begin testing.
Pressing the START button will begin testing
and put the tester into TEST status. Pressing the
MANU/AUTO soft-key will return the tester to
VIEW status. Also, pressing the PAGE key
under READY status can switch to specific
page view for MANU or AUTO mode.
READY
status in
MANU
test
READY
status in
AUTO
test
1
AUTO steps list – page 2