GW Instek GPT-9500 Series - Page 38

GPT-9500 Series User Manual
38
TEST Status
TEST status is active when a MANU test or
AUTO test is running. Pressing STOP will
cancel the MANU test or the remaining steps in
an AUTO test instantly.
TEST status
in MANU
test
TEST status
in AUTO
test
STOP Status
STOP status is shown when a MANU or an
AUTO test did not finish running and has been
stopped by user. Pressing STOP will return the
tester to READY status.
STOP status
in MANU
test
STOP status
in AUTO
test