GW Instek GPT-9500 Series User Manual

OPERATION
87
2. The tester will immediately restore back to the
READY status after PASS judgment. However,
if the PASS HOLD is activated, PASS judgment
will persist until the set duration of PASS
HOLD is fully met. Refer to page 82 for details.
In addition, pressing the STOP
button during the set duration of
PASS HOLD can return to READY
status immediately.
Note
The buzzer will only sound if the Buzzer is set to
ON. See page 142 for details.
PASS Timing
Diagrams
The timing diagrams below show the ACW, DCW
and IR timing for the START status, TEST status
and PASS judgment.
ACW PASS
Timing
FALL TIME
& DISCHARGE
Output V
time
START
TEST
PASS
RAMP
UP
TEST TIME
DCW PASS
Timing
Output V
time
START
TEST
PASS
RAMP
UP
TEST TIME
FALL TIME
& DISCHARGE

GW Instek GPT-9500 Series Specifications

General

Brand	GW Instek
Model	GPT-9500 Series
Category	Test Equipment
Language	English