3-2
Features Description
LLDP
LLDP enables a device to maintain and manage its own and its immediate
neighbor’s device information, based on which the network management
system detects and determines the conditions of the communications
links. This document describes:
z Introduction to LLDP
z Performing Basic LLDP Configuration
z Configuring the Encapsulation Format for LLDPDUs
z Configuring the Encapsulation Format of the Management Address
z Configuring CDP Compatibility
z Configuring LLDP Trapping
MSTP
MSTP is used to eliminate loops in a LAN. It is compatible with STP and
RSTP. This document describes:
z Introduction to MSTP
z Configuring the Root Bridge
z Configuring Leaf Nodes
z Performing mCheck
z Configuring Digest Snooping
z Configuring No Agreement Check
z Configuring Protection Functions
Smart Link
Smart Link is a solution for active-standby link redundancy backup and
rapid transition in dual-uplink networking. This document describes:
z Smart Link Overview
z Configuring a Smart Link Device
z Configuring an Associated Device
Monitor Link
Monitor link is a port collaboration function used to enable a device to be
aware of the up/down state change of the ports on an indirectly connected
link. This document describes:
z Monitor Link Overview
z Configuring Monitor Link
VLAN
Using the VLAN technology, you can partition a LAN into multiple logical
LANs. This document describes:
z Introduction to VLAN
z Types of VLAN
z Isolate-user-vlan configuration
z Introduction and Configuration of Voice VLAN
GVRP
GVRP is a GARP application. This document describes:
z GARP overview
z GVRP configuration
z GARP Timers configuration
QinQ
As defined in IEEE802.1Q, 12 bits are used to identify a VLAN ID, so a
device can support a maximum of 4094 VLANs. The QinQ feature
extends the VLAN space by allowing Ethernet frames to travel across the
service provider network with double VLAN tags. This document
describes:
z Introduction to QinQ
z Configuring basic QinQ
z Configuring Selective QinQ
z Configuring the TPID Value in VLAN Tags
To Next Page
Loading...
Need help?
General